iSensor-SPI-Buffer  1.15
Firmware for the iSensor-SPI-Buffer board to enable full throughput buffered data capture on Analog Devices IMUs
Macros | Functions | Variables
system_stm32f3xx.c File Reference

CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. More...

#include "stm32f3xx.h"
Include dependency graph for system_stm32f3xx.c:

Macros

#define HSE_VALUE   ((uint32_t)8000000)
 
#define HSI_VALUE   ((uint32_t)8000000)
 
#define VECT_TAB_OFFSET   0x0
 

Functions

void SystemInit (void)
 Setup the microcontroller system. More...
 
void SystemCoreClockUpdate (void)
 Update SystemCoreClock variable according to Clock Register Values. The SystemCoreClock variable contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters. More...
 

Variables

uint32_t SystemCoreClock = 8000000
 
const uint8_t AHBPrescTable [16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}
 
const uint8_t APBPrescTable [8] = {0, 0, 0, 0, 1, 2, 3, 4}
 

Detailed Description

CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.

Author
MCD Application Team
  1. This file provides two functions and one global variable to be called from user application:
    • SystemInit(): This function is called at startup just after reset and before branch to main program. This call is made inside the "startup_stm32f3xx.s" file.
    • SystemCoreClock variable: Contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.
    • SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must be called whenever the core clock is changed during program execution.
  2. After each device reset the HSI (8 MHz) is used as system clock source. Then SystemInit() function is called, in "startup_stm32f3xx.s" file, to configure the system clock before to branch to main program.

3. This file configures the system clock as follows:

Supported STM32F3xx device

System Clock source | HSI

SYSCLK(Hz) | 8000000

HCLK(Hz) | 8000000

AHB Prescaler | 1

APB2 Prescaler | 1

APB1 Prescaler | 1

USB Clock | DISABLE

=============================================================================

Attention

© Copyright (c) 2016 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause